With OMC-V series wrapping machines, the product is driven through vertically rotating ring. The products are wrapped spirally, or only making film bands. Also bottom beams can be fixed with specific elastic bands. Machine size is defined according to product maximum cross diagonal measurement. Main options to meet requirements in different segments are:

• Integrated top sheet or product end closing equipment
• Automatic roll changer 1+3 rolls
• Power-Pre-Stretch carriage
• Ring height adjustement kit for big load size compensation
• Load support rollers on top/side
• Wrapzone conveyors for various loads

OMC-V2000

The modular designed and built OMC-V2000 vertical ring (band) wrapping machine is meant to secure loads with 250 mm wide power pre-stretch film. In addition, the state of the art film carriage provides the ability to narrow the film to a film band of approximately 100 mm wide. Thus creating a strong elastic LDPE film band. So called Roping.

The OMC-V2000 Vertical spiral & band wrapping solutionEverything in the interest of the customer:

• Bands can be placed independently or can create cross connections between several bands to secure loads during transport and storage.
• Because the pressure on the corners is distributed over a width of approximately 100 mm. The risk of damage is considerably reduced and corner protectors are, in principle, unnecessary.
• Most suitable pack sizes for the OMC-V2000 Band wrapping machine W 400 – 1,200 mm x H 400 – 1,200 mm x L > 1,200 mm
• The optional Automatic Film Roll Changer (with 1 + 3 rolls) allows longer production hours without operator intervention, thus reducing machine downtime considerably.