Products
- Products
- CAB FL+
- Description
- Specifications
- Documentation
The performance and quality of a marking mainly depends on the output power and the laser beam focus.
cab FL+ marking lasers are diode-pumped and air-cooled. They have high beam quality and pulse peak power.
Laser source output powers are from 20 to 50 Watt. Different plano-spherical lenses allow marking in fields from 69 x 69 to 290 x 290 mm. Marking is possible on plastics and metals as well as on coated surfaces.
FL+ marking lasers consist of two units. The control unit has a laser source already integrated. The scan head is connected to the laser source via a fibre. It may be assembled in all possible position.
- Laser source: Ytterbium fiber laser, pulsed, air-cooled
- cw output power max. W 20 30 50
- Pulse energy mJ 1 1 1
- Wave length nm 1,064
- Beam quality M2 <1.8
- Pulse width ns 80 - 120
- Pulse frequency kHz 2 - 200
- Fiber coupling m 2.5
- Scan head
- Assembly horizontal / vertical
- Marking speed mm/s ~5,000
- Pilot laser
- Wave length nm 650
- cw output power mW <1
- Electronics
- Processor 32 bit clock rate MHz 600
- Main memory (RAM) MB 256
- Data memory (Flash) MB 512
- Extensions (Flash) USB memory stick
- Dimensions and weights Rack 4RU 19“
- Control unit
- W x H x D mm 420 x 178 x 420
- Weight kg 16
- Scan head
- W x H x D mm 170 x 110 x 330
- Weight kg 7
- Operating data
- Power supply 100-240 VAC, 50/60 Hz
- Power switch ON/OFF
- Power consumption Standby W 65
- max. W 175 200 250
- Temperature / humidity
- Operation 5-40 °C / 10-85 % not condensing
- Storage 0-60 °C / 20-80 % not condensing
- Transport –25-60 °C / 20-80 % not condensing
- Approvals CE, FCC class A, ICE S3
- Laser safety class EN60825-1
- Laser source Class 4
- Pilot laser Class 2
Download CAB FL+ Brochure